|
 Extractors – NOW
SELLING DIRECT
896 Automatic Extractor
The 896-Series of heavy duty extractors
was developed in the early 90’s to meet the die casters’ need for a
truly reliable system which occupies minimal space. Currently, six
models are available from the 50” high speed unit to the gigantic
105” stroke mammoth. All 896 units share the following common
design points:
Parallel linkage system which provides linear movements and maximum
space savings
Horizontal
(gravity immune) linkage arrangement for maximum efficiency and
smoothest motion
“Hanging”
support mechanism to provide optimal clearance underneath for conveyors,
bins, etc.
Crank drive
mechanism with linear slider bearings for unparalleled speeds and
efficiencies
|
Features |
896-50 |
896-55 |
896-64 |
896-80 |
896-90 |
896-105 |
Typical Machine
Compatibility (tons) |
20-80 |
125-200 |
200-400 |
400-800 |
800-1,200 |
1,200+ |
Main Arm Drive |
DC Motor |
DC Motor |
DC Motor |
DC Motor |
DC Motor |
DC Motor |
Extend Drive |
Pneumatic |
Pneumatic |
Pneumatic |
Pneumatic |
Pneumatic |
DC |
Clamp and Roll
Down Motion |
Pneumatic |
Pneumatic |
Pneumatic |
Pneumatic |
Pneumatic |
Pneumatic |
High Speed
Positioning Encoder |
1 |
1 |
1 |
1 |
1 |
2 |
Mount Styles
(Conveyor/
Pedestal/Gantry) |
C/P/G |
C/P/G |
C/P/G |
G |
G |
G |
Max. Operating Speed
(dry cycles/hour) |
550 |
500 |
450 |
350 |
250 |
175 |
Max. Horizontal
Arm Stroke (mm) |
50"(1270) |
55"(1395) |
64"(1625) |
80"(2030) |
90"(2285) |
105"(2665) |
Max. Extend Stroke (mm) |
3"(75) |
5"(125) |
5"(125) |
5"(125) |
7"(175) |
12"(300) |
Max. Extraction
Weight (kg) |
4 lbs (1.8) |
6 lbs (2.7) |
10 lbs (4.5) |
20 lbs (9.1) |
30 lbs (13.6) |
40 lbs (18.2) |
Shot Height
Adjustment (fine adj) |
4.5"(115) |
4.5"(115) |
6"(150) |
9"(225) |
9"(225) |
15"(380) |
Photoelectric Part
Sensors (std) |
4 |
4 |
4 |
4 |
4 |
4 |
Wire Whisker
Part Sensors |
Optional |
Optional |
Optional |
Optional |
Optional |
Optional |
Parts Cooling
Conveyor |
Optional |
Optional |
Optional |
Optional |
Optional |
Optional |
Scrap Return
Conveyor |
Optional |
Optional |
Optional |
Optional |
Optional |
Optional |
Dual Mode Die
Spraying |
Optional |
Optional |
Optional |
Optional |
Optional |
Optional |
3-Color Mode
Indicating Tower Light |
Std. |
Std. |
Std. |
Std. |
Std. |
Std. |
Programmable
"Standby"
Position |
Std. |
Std. |
Std. |
Std. |
Std. |
Std. |
Programmable
Stacking Capability |
Available |
Available |
Available |
Available |
Available |
Available |
Job Specific
Memory Recall |
Std. |
Std. |
Std. |
Std. |
Std. |
Std. |
D-Series Snair
Control System |
Std. |
Std. |
Std. |
Std. |
Std. |
Std. |
|
|
|
 803
Automatic Extractor
Like the Snair ladling
systems, the extractors are gaining rapid acceptance and accolades as
units are delivered to many repeat customers around the world.
The recent development and introduction of the 803 high speed extractor
raises the standards for all extractors on the market. With cycles
speeds exceeding 700 dry cycles per hour, this cost-effective unit will
quickly become a staple of the high volume die caster. The 803
expands on the time tested design of the 896 extractor by orienting the
parallel linkage arrangement VERTICALLY. This enables the 803 to
achieve a smaller overall size to accommodate a broader range of die
casting machines.
803
-55 Extractor Specifications |
Die
Casting Machine Compatibility |
20
- 200 Tons |
Configuration |
Parallel
Linkage/DC Motor Drive System |
Application |
Helper/Operator
Side and Hot/Cold Chamber |
Mounting |
Free-Standing,
Wheel Mounted Pedestal |
Positioning
Encoders |
1High
Speed (Arm) |
Max.
Operating Speed
(dry cycles per hour) |
700 |
Max. Horizontal
Arm Stroke (mm) |
55"(1400) |
Max. Extend Stroke (mm) |
3"(75)
or 4"(100) |
Max. Extraction
Weight (kg) |
4 lbs
(1.8 kg) |
Shot Height
Adjustment Range |
14"(355) |
Arm
Drive Motor |
3/4
HP DC |
Arm
Stroke Repeatability |
+/-
0.078" (2.0) |
Machine
Weight
(approximate) (kg) |
1000
lbs (455) |
Operating
Noise Level |
Not
Exceeding 70 dB |
|
Snair Parts Cooling
& Conveying System
Snair conveyor Controls
|
Cooling
and Conveying Systems
The Snair parts cooling and conveying systems have been very popular
since the early 90’s. Utilizing a heavy duty solid plate steel
(not mesh) belting and a unique cooling “tunnel”, the resulting
design is one of high efficiency, low noise, and near non-existent
maintenance. The height-varying cooling tunnel channels the air
flow away from the trim press operator and provides highly effective
cooling rates with minimal power consumption. Belt widths are
available from 8” to 42” with lengths from 7’ to 20’. The
controls are independent “plug-and-play” when the conveyor is
purchased as a stand alone or integrated with a Snair extractor with
D-Series controls. This independent controller allows indexing
motion in concert with the extractor. When purchased with a Snair
extractor with G-Series controls, the conveyor controls are installed
directly into the main control cabinet of the G-Series.
|
|
